Heavy Duty Winder
WINDING AND UNWINDING UNIT FOR ROLLS UP TO 500 KG
The Crest Heavy Duty Winder is a stand-alone winding and unwinding unit for heavy rolls of foil, film and textile. It carries rolls up to 500 kg and ø1200 mm, handles material widths up to 3200 mm and runs at process speeds up to 25 m/min. Pneumatic clamping shafts take the torque, and a diameter sensor feeds back to the motor so speed and web tension stay under control from full roll to core. A welded steel frame on swivel wheels with ground-anchorable feet lets you move it to the line and fix it there. Built for laminating, coating and converting lines that need a reliable unwind or rewind station for heavy jumbo rolls.
Where do you need it for?
01 / UNWINDING HEAVY JUMBO ROLLS
For laminating, coating and converting lines fed from rolls that are too heavy or too wide for a standard unwind. The Heavy Duty Winder carries rolls up to 500 kg and ø1200 mm and keeps the tension under control from full roll to core.
02 / REWINDING FINISHED MATERIAL
At the end of the line, it winds laminated, coated or converted material back onto 3 inch cores, up to ø1200 mm. Clockwise and counterclockwise operation lets you choose the winding direction per job.
03 / A SEPARATE WINDING STATION
For processors of foils, films and textiles who need an extra winding or unwinding position next to an existing machine, or one mobile unit they can move between lines.
BUILT FOR HEAVY ROLLS
The Heavy Duty Winder is built for one demanding job: getting heavy rolls on and off a production line without losing control over web tension.
A frame of welded steel beams carries rolls up to 500 kg and ø1200 mm. Pneumatic clamping shafts are designed for high torques and heavy weights, safety chucks with manual side shift position the roll across the web, and a diameter sensor with feedback to the motor regulates speed and tension automatically. It runs clockwise and counterclockwise at up to 25 m/min.
Best suited for
- Laminating and coating lines fed from heavy jumbo rolls.
- Converters who need a separate unwind or rewind station next to an existing machine.
- Processors of foils, films and textiles on rolls up to 500 kg.
- Production floors that move one winding unit between several lines.
- Operations that want tension to follow the roll automatically instead of correcting it by hand.
One frame. Your width.
The Heavy Duty Winder comes with a 1600 mm working width as standard and can be built for material up to 3200 mm wide. Core size and integration with your line are adapted to your process.
| Component | Standard | Optional |
|---|---|---|
| Working width | 1600 mm | Up to 3200 mm, other widths on request |
| Core size | 3 inch | Other core sizes on request |
| Clamping shafts | Pneumatic, for high torques and heavy weights | |
| Chucks | Safety chucks with manual side shift | |
| Tension control | Diameter sensor with feedback to the motor | |
| Winding direction | Clockwise and counterclockwise | |
| Frame | Welded steel beams, swivel wheels, ground-anchorable feet | |
| Integration | Stand-alone unit | Customised to your line and process |
Suitable materials
Working with a heavier, wider or special material? Contact our specialists.
WHEN TO CHOOSE THE HEAVY DUTY WINDER
- Your rolls weigh up to 500 kg or reach ø1200 mm and your current unwind cannot carry them safely.
- You need a separate winding or unwinding station next to a laminator, coater or slitter.
- You want web tension to adjust automatically as the roll diameter changes.
- You process wide material, up to 3200 mm.
- You want one mobile unit that you can anchor at different lines.
WHERE THE HEAVY DUTY WINDER EARNS ITS PLACE.
LAMINATING AND COATING LINES
Feeding a laminator or coater from heavy jumbo rolls, or taking the finished web off at the end of the line. Tension that follows the roll diameter keeps the web flat and even going into the nip.
FOIL AND FILM CONVERTING
For converters who handle wide foils and films on large rolls and need a dedicated winding station alongside slitting, cutting or inspection, without changing the main machine.
TEXTILE PROCESSING
For processors of textiles on heavy rolls who need a robust unwind or rewind with steady, automatically regulated tension and a frame that stays put once anchored.
BUILT FOR HEAVY-DUTY PRODUCTION
500 KG ON PNEUMATIC SHAFTS
Pneumatically operated clamping shafts are designed for high torques and heavy weights. Safety chucks with manual side shift let operators position the roll accurately across the web.
TENSION THAT FOLLOWS THE ROLL
As a roll unwinds, its diameter changes and so does the tension. The diameter sensor feeds this back to the motor, which adjusts speed and tension automatically, so operators no longer have to keep correcting.
MOBILE WHEN YOU MOVE, FIXED WHEN YOU RUN
A frame of welded steel beams on swivel wheels goes wherever the line needs it. Integrated machine feet anchor it to the floor for stable production.
Heavy Duty Winder technical specifications
| Specification | Heavy Duty Winder |
|---|---|
| Function | Winding and unwinding |
| Maximum roll weight | 500 kg |
| Maximum roll diameter | ø1200 mm |
| Maximum material width | 3200 mm |
| Standard working width | 1600 mm, other widths on request |
| Maximum process speed | 25 m/min |
| Core size | 3 inch, other sizes on request |
| Clamping shafts | Pneumatic, for high torques and heavy weights |
| Chucks | Safety chucks with manual side shift |
| Tension control | Diameter sensor with feedback to the motor, automatic regulation of speed and tension |
| Winding direction | Clockwise and counterclockwise |
| Frame | Welded steel beams, swivel wheels, ground-anchorable machine feet |
Frequently asked questions
The Crest Heavy Duty Winder is a stand-alone winding and unwinding unit for heavy rolls of foils, films and textiles. It carries rolls up to 500 kg and ø1200 mm, handles material widths up to 3200 mm and runs at process speeds up to 25 m/min.
Yes. It works as an unwind station feeding a line or as a rewind station at the end of a line. It runs clockwise and counterclockwise, so you choose the winding direction per job.
Rolls can weigh up to 500 kg with a diameter up to ø1200 mm. The pneumatic clamping shafts are designed for the high torques and weights that come with rolls of this size.
The standard working width is 1600 mm. Material widths up to 3200 mm are possible, and other widths are available on request.
A diameter sensor measures the roll and feeds this back to the motor. The motor adjusts winding speed and material tension automatically as the roll diameter changes.
3 inch cores as standard. Other core sizes are available on request.
Yes. The welded steel frame stands on swivel wheels, and the integrated machine feet can be anchored to the floor once the unit is in position.
Yes. Working width, core size and integration with your laminating, coating or converting line can be adapted to your process. Contact our engineers to discuss your application.
Talk to a Crest engineer about your application
Direct contact with engineering. No reseller layer. Response within one business day.

