TS-2100 Liquid Silicone

The TS Silicone is the specialist solution for face mounting printed images to the back of clear acrylic. Its chrome top roller applies even pressure across the full width, spreading the liquid silicone into a clean, bubble-free layer. The result is the flawless depth and clarity that premium acrylic face-mount work is known for, with no roller marks in the bond.

For producers of high-end wall art and display panels bonding prints behind glass. Liquid silicone demands a rigid, perfectly smooth roller surface, and the hard chrome roller against the EPDM counter-roller delivers exactly that. Every panel comes off the machine with the optical bond quality that defines a premium finish.

When the format grows, so does the risk of an uneven bond. The TS-2100 handles material up to 2150 mm wide, so oversized acrylic and glass face mounts run in a single, controlled pass. Consistent pressure across the full working width means no compromise on finish quality at any size.

The TS Silicone is purpose-built for one demanding job: applying liquid silicone cleanly and evenly behind rigid transparent substrates.

A hard chrome top roller gives a mark-free bonding surface, running against an EPDM-rubber bottom roller for controlled counter-pressure. Roller pressure reaches up to 8 N/mm across the full working width, at speeds up to 15 m/min.

An integrated backing-paper feed pulls the paper cleanly from beneath the table, and a digital nip-opening read-out lets operators set the exact gap for the substrate and return to it every run.

The machine runs entirely without compressed air, simplifying installation and lowering operating costs.

• Photo labs and fine-art finishers face mounting prints behind acrylic and glass.
• Premium display and wall-art producers who demand a flawless optical bond on every panel.
• Finishers running oversized formats, with working widths up to 2150 mm on the TS-2100.
• Operations that need repeatable, bubble-free silicone bonding shift after shift.
• Producers looking for even pressure across the full width without roller marks in the bond.
• Workshops that want a clean, integrated backing-paper feed without a separate stand.

For photo labs and fine-art finishers bonding prints to the back of clear acrylic. The TS Silicone applies liquid silicone with the hard chrome roller, spreading it into an even, bubble-free layer across the full working width. The result is the depth, gloss and clarity that make acrylic face mounts a premium product, with no roller marks in the bond and no compromise on repeatability.

For producers of high-end wall art, gallery pieces and display panels mounting prints behind glass. The rigid chrome roller and EPDM counter-roller deliver the controlled, even pressure that a clean silicone bond demands on heavy, rigid substrates. Every panel comes off the machine with a flawless optical finish, the standard that premium face-mount work is judged on.

For finishers running oversized formats where an uneven bond would be costly. The TS-2100 handles material up to 2150 mm wide, keeping pressure consistent across the entire width so large acrylic and glass face mounts run in a single controlled pass. The integrated backing-paper feed and digital nip read-out keep large-format production clean, fast and repeatable.