Large Nip Laminator

DRY LAMINATION OF DOORS AND PANELS UP TO 130 MM THICK

The Crest Large Nip Laminator laminates doors and panels of all kinds up to 130 mm thick with double-sided adhesive film straight from the roll. One side or both sides at once, with no curing time and a wrinkle-free finish. Its large roller nip takes thick, rigid panels that a standard laminator cannot open for, while heated rollers up to 135 °C and up to 4.5 N/mm nip pressure give a firm, even bond. Available in 1200 and 1400 mm working widths, and up to 2500 mm on request. Built for door manufacturers, furniture and interior panel producers and industrial converters who want to bond decorative or functional film to thick panels in-house.

Panels up to 130 mm thick 1200 or 1400 mm working width Single or double-sided Dry lamination, no curing time Heated rollers up to 135 °C Up to 4.5 N/mm nip pressure

Where do you need it for?

01 / DOOR LAMINATION

For door manufacturers who finish flat interior and exterior doors with decorative, protective or functional film. The Large Nip Laminator takes door leaves up to 130 mm thick and laminates one or both faces in a single pass. Dry lamination with double-sided adhesive film means the door can be handled, stacked and shipped straight away.

02 / FURNITURE AND INTERIOR PANELS

For furniture, shopfitting and interior builders who bond decor and protective films to MDF, chipboard, plywood and composite panels. Adjustable roller pressure, heated rollers and a wrinkle-free film path give a clean, even surface on every panel, from single pieces to full production runs.

03 / FOAM, INSULATION AND SANDWICH PANELS

For producers of insulation boards, foam panels and sandwich elements. With the option of both rollers driven, the Large Nip Laminator feeds soft and compressible material evenly through the nip. Infrared pre-heating and an ionization bar are available for demanding films and static-sensitive surfaces.

Not sure which application fits your line?

Contact our specialists.

 

Talk to a Crest engineer about your application

BUILT FOR THICK PANELS

The Large Nip Laminator is built around one thing: a roller nip large enough for thick, rigid panels. Doors, boards and composite panels up to 130 mm pass between two pressure rollers, adjustable by handwheel up to a nip pressure of 4.5 N/mm. Roller heating goes up to 135 °C. The top and bottom unwind positions each carry a 3 inch autogrip shaft with adjustable brake and an integrated measuring ruler, zero at the center of the shaft, so film is positioned quickly and exactly on every roll change. Standard speed is 5.5 m/min, with up to 25 m/min available as an option for higher-volume lines. Rolls up to 550 mm in diameter and 250 kg keep the machine running longer between changes.

Best suited for

  • Door manufacturers laminating flat door leaves on one or both sides.
  • Furniture and interior panel producers applying decor and protective films.
  • Producers of insulation, foam and sandwich panels up to 130 mm thick.
  • Converters who want to bring panel lamination in-house instead of outsourcing it.
  • Lines that need dry lamination with no curing time, so panels move straight to the next step.
  • Factories that plan to automate, with cutting, stacking and de-stacking integrated around the laminator.

One nip. Your configuration.

The Large Nip Laminator starts as a stand-alone panel laminator and is configured to your process. Add width, speed, cutting or panel handling, and it becomes the laminating station your line actually needs.

Component Standard Optional
Working width 1200 or 1400 mm Up to 2500 mm or more on request
Material thickness Up to 130 mm More on request
Laminating speed 5.5 m/min Up to 25 m/min
Adhesive Double-sided pressure-sensitive adhesive film Hotmelt adhesive with heat assist
Winding 1 unwind top, 1 unwind bottom, adjustable brake Additional wind-up and unwind positions, wrinkling control, stopper rings
Soft materials   Both rollers driven, for foam and other soft materials
Cutting   Slitting on the roll system, automatic cutting systems to separate the panels
Panel handling   External infeed and outfeed tables, panel de-stackers and stackers
Control and read-out Handwheel pressure adjustment Digital nip opening read-out, length measuring, auto stop at a set position, pre-settings per material
Pre-treatment   Infrared pre-heating, ionization bar against static charge
Cores 3 inch 3 to 6 inch core adapters

Stand-alone configuration. For door and panel producers laminating with double-sided adhesive film. Heated rollers, top and bottom unwind with autogrip shafts and handwheel pressure adjustment.

Production line configuration. With heat assist, higher speed, automatic cutting and panel stackers, the Large Nip Laminator becomes the laminating station in an automated panel line, interfaced with your other machines.

Suitable materials

Doors and door leavesMDF and chipboard panelsPlywood and wood panelsComposite and sandwich panelsFoam and insulation boardsRigid plastic sheetsDecorative filmsProtective filmsDouble-sided adhesive filmsHotmelt adhesive (with heat assist)Custom substrates on request

Working with a thick or special panel? Contact our specialists.

WHEN TO CHOOSE THE LARGE NIP LAMINATOR

  • Your doors or panels are up to 130 mm thick and do not fit the nip of a standard laminator.
  • You laminate one or both faces with double-sided adhesive film and want no curing time.
  • You need a working width of 1200 or 1400 mm, or up to 2500 mm on request.
  • You want to start stand-alone and add cutting, stacking and line integration later.
  • You laminate foam or other soft materials and need both rollers driven.
  • You want direct contact with the engineers who build your machine.

Laminating sheets in a continuous, non-stop line with automatic cutting? Choose the Laminator Fly Cutter. Large-format prints and rigid boards up to 2500 mm wide? See the BL-2500. Laminating glass panels? See the Glass Panel Laminator.

WHERE THE LARGE NIP LAMINATOR EARNS ITS PLACE.

DOOR PRODUCTION

Laminating doors in-house gives you control over lead time, decor choice and quality. The Large Nip Laminator handles door leaves up to 130 mm thick, laminates both faces in one pass and needs no curing time, so finished doors go straight on to edging, hardware and packing.

FURNITURE AND SHOPFITTING

For panels that need a decorative or protective surface before machining. Pre-settings per material and length measuring keep repeat runs consistent, while external infeed and outfeed tables support long, heavy panels on the way in and out of the nip.

AUTOMATED PANEL LINES

With automatic cutting systems, panel de-stackers and stackers and interfacing with other machines, the Large Nip Laminator becomes the laminating station in an automated line. Heat assist and speeds up to 25 m/min keep pace with high-volume production.

BUILT FOR INDUSTRIAL PRODUCTION

A NIP FOR THICK PANELS

The roller nip takes panels up to 130 mm as standard, with more on request. Two pressure rollers, adjusted by handwheel, deliver up to 4.5 N/mm, and an optional digital read-out shows the exact nip opening, so every panel type can be set up again in seconds.

FAST, ACCURATE FILM CHANGES

3 inch autogrip shafts with an integrated measuring ruler, zero at the center of the shaft, let operators center film quickly and precisely. Each unwind has an adjustable brake for even tension, and wrinkling control and stopper rings are available for demanding films.

SAFE OPERATION

Optical photocells guard the roller nip for finger protection, with mechanical finger protection at the rear. Emergency stop buttons sit on all corners, and a jog mode with a limited fixed speed lets operators set up material safely.

Large Nip Laminator technical specifications

Specification LN-1200 LN-1400
Maximum material width 1200 mm (47.2 in) 1400 mm (55.1 in)
Maximum material thickness 130 mm (5.1 in), more on request
Laminating speed 5.5 m/min (18 ft/min), up to 25 m/min optional
Maximum nip pressure 4.5 N/mm
Roller temperature Heated, up to 135 °C (275 °F)
Pressure rollers 2, adjustable by handwheel
Winding positions 1 unwind top, 1 unwind bottom, adjustable brake
Autogrip shafts 2 × 3 inch, with integrated measuring ruler
Core 76.2 mm (3 in)
Maximum (un)wind diameter 550 mm (21.7 in)
Maximum roll weight 250 kg (551 lbs)
Voltage 3P / N / PE, 230 Vac, 50/60 Hz, 11 A
Noise level Less than 70 dB(A)
Dimensions W × D × H 1920 × 990 × 1670 mm 2120 × 990 × 1670 mm
Table height 920 mm, adjustable
Unpacked weight 800 kg 900 kg

Frequently asked questions

What is the Crest Large Nip Laminator?

The Crest Large Nip Laminator is a dry laminating machine for doors and panels up to 130 mm thick. It laminates one or both sides with double-sided adhesive film straight from the roll, in working widths of 1200 and 1400 mm. It is built in the Netherlands by Crest Dutch Machinery.

What is dry lamination?

In dry lamination the panel is bonded with a film that already carries its adhesive, such as a double-sided pressure-sensitive adhesive film. There is no wet glue to apply and no curing time, so panels can be handled, stacked and processed further straight after lamination.

How thick can the panels be?

Up to 130 mm as standard. Thicker panels are possible on request.

Can the Large Nip Laminator laminate both sides in one pass?

Yes. With an unwind position on top and one at the bottom, film is applied to both faces of the panel at the same time. Each unwind has a 3 inch autogrip shaft with adjustable brake and an integrated measuring ruler.

Which working widths are available?

The standard versions laminate panels up to 1200 mm or 1400 mm wide. Other working widths from 1200 mm up to 2500 mm, or more, are available on request.

How fast does it laminate?

The standard laminating speed is 5.5 m/min. As an option the machine runs up to 25 m/min. Heat assist options allow a higher laminating speed or the use of hotmelt adhesive instead of pressure-sensitive adhesive.

Can it be integrated in an automated production line?

Yes. Options include automatic cutting systems to separate the panels after laminating, panel de-stackers and stackers, interfacing with other machines and pre-settings for different materials and applications.

Is it suitable for foam and other soft materials?

Yes. With the option of both rollers driven, soft and compressible materials such as foam and insulation boards are fed evenly through the nip. Infrared pre-heating is available as well.

What safety features does the Large Nip Laminator have?

Optical photocells at the roller nip for finger protection, mechanical finger protection at the rear, emergency stop buttons on all corners and a jog mode with a limited fixed speed for setting up material.

 

Talk to a Crest engineer about your application

Discuss your application →

Direct contact with engineering. No reseller layer. Response within one business day.

Talk to a Crest engineer about your application